Temperature: | Ordinary Temperature |
---|---|
Actuator: | Electric |
Connection Form: | Thread |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Diaphragm Repair Kit Order Code | Fitted Valve Code | Diaphragm Material |
K2000 | CA20T RCA20T |
Nitrile |
K2007 | Viton | |
K2016 | RCAC20T3 / RCAC20ST3 RCAC20DD3 / RCAC20FS3 |
Nitrile |
K2017 | Viton | |
K2003 | CA20MM | Nitrile |
K2034 | RCAC20T4 / CAC20T4 RCAC20DD4 / CAC20DD4 RCAC20FS4 / CAC20FS4 |
Shockwave |
K2501 | RCA25T / CA25T RCA25DD / CA25DD RCA25MM / CA25MM |
Nitrile |
K2503 | Viton | |
K2529 | RCAC25T3 / RCAC25FS3 RCAC25DD3 / RCAC25FH3 |
Nitrile |
K2530 | Viton | |
K2546 | RCAC25T4 / CAC25T4 RCAC25DD4 / CAC25DD4 RCAC25FS4 / CAC25FS4 |
Shockwave |
K3500 | CA35T RCA35T |
Nitrile |
K3501 | Viton | |
K4000 | CA40MM RCA40MM |
Nitrile |
K4007 | Viton | |
K4502 | CA45T / RCA45T CA45DD / RCA45DD |
Nitrile |
K4503 | Viton | |
K5004 | CA50T / RCA50T CA62T / RCA62T |
Nitrile |
K5000 | Viton | |
K7600 | CA76T / RCA76T CA76MM / RCA76MM |
Nitrile |
K7601 | Viton | |
K10200 | CA102MM RCA102MM |
Nitrile |
K10201 | Viton |
Product Description
High performance diaphragm valve with threaded ports. Available with integral pilot or as remotely piloted valve. Outlet at 90° to inlet.
Suitable for
Dust collector applications, in particular for reverse pulse jet filter cleaning including bag filters, cartridge filters, envelope filters, ceramic filters, and sintered metal fibre filters.
Operation
Recommended on time range: 50-500ms
Recommended time between pulses: 1 minute or greater
Approvals
Integrally piloted valves meet the requirements of:
1. C-Tick
2. EMC (89/336/CE)
3. ATEX II 3 G & D (94/9/CE) (when fitted with QR or QF type solenoids)
Pulse jet valve installation
1. Prepare supply and blowtube pipes to suit valve specification. Avoid installing valves underneath the tank.
2. Ensure tank and pipes are free from dirt, rust or other particulate.
3. Ensure supply air is clean and dry.
4, Mount valves to inlet pipes and blowtube to valves, ensuring no excess thread sealant can enter the valve itself.
5. Make electrical connections to solenoid or connect RCA pilot port to pilot valve (RCA valves only).
6. Apply moderate pressure to system and check for installation leaks.
7. Fully pressurise system.
8. Test fire and listen for proper actuation and crisp pulse noise.
Product picture
Suppliers with verified business licenses