Polishing Chromed Forged Brass Mini Ball Valve

• Model: 1/4 Male X Female
• Material: Brass
• Driving Mode: Manual
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: ball valve
• Structure: Oil Seal Ball Valve
• Function: Relief Valve
• Brand Name: Boss Mini Ball Valve
• Transport Package: PP Bag
• Specification: CE
• Trademark: SMART
• Origin: China
• HS Code: 8481804090
• Production Capacity: 50000PCS/Year
• Package Size: 10.00cm * 10.00cm * 10.00cm
• Package Gross Weight: 0.500kg

Product Description

Chrome-plated brass for higher corrosion resistance than regular brass or steel
Lever handle for on/off manual control
Full port flow for higher operating efficiency than standard port
Inline valve for connecting two pipes going in the same direction
Female and male NPT threads for connecting male threaded pipe fittings to female threaded pipe fittings

material	size	medium	seal	weight	thread	treatment
brass	1/4, 1/8. 3/4, 3/8 INCH	Water	PTFE	20g-50g	NPT	Lead Free
stainless steel	1" 1 -1/2 inch	gas	NBR	60-100g	GB	Zinc
Alloy	2 inch	air	EPDM	200g	PT	Nickel

Brass mini ball valve(MxF)
Polishing surface and chrome plated.
We produce all types of brass valves. Such as Brass Ball Valves, brass gate valve, brass stop valve, brass gas valve, brass angle valves, brass check valve, brass strainer etc
Brass ball valves, ball valves, brass valves, plumbing valves, water valves (Threaded ends)

Surface: Plated nickel or plated chrome or nature color.
Size: 1/2''-4''(DN15-DN100)
Material: C37700, MS58(CuZn40Pb2), CuZn39Pb3, CW602N C2121 CW614N
Connection thread: NPT, BSP, BSPT ( male and female is available)
Working Pressure: 16Bar-40Bar( 150#WSP, 600WOG)

Working Media: Water, Steam, Oil etc.
2-piece body, full port or reduced port, chrome plated ball, metal-to-metal body seal, PTFE seat, brass spindle adjustable packing nut, steel or zinc-alloy handle. PVC handle cover.
We also do as clients' special requirements

Ball valve installation≈plication instruction
1. Range of application 
The ball valve is mainly used for cutting off, distributing and changing the direction of the flow medium in the pipeline. To prolong the service life of the ball valve, full open and full close are highly suggested. 

2. Main technical parameters of the product
1, we select high quality cooper material and apply hot forging process in the production process. 
2, The main working medium are water, oil, gas, etc. 
3. Working temperature range from -10º Cto 120º C
4. Each nominal working pressure of our ball valve are 2.5Mpa, 2.0Mpa and 1.6Mpa

3. Installation manual
1, For pipe thread connection type ball valve, we should make sure the pipe being vertical against the end surface of the valve body when tighten the connection part. Our special warning is that we should only wrench the octagonal at the same end of body instead of the other side to avoid deformation so as to affect its normal open function. 
2, For internal thread type ball valve, we should control the length of the external thread at the pipe end in case deformation of the valve body caused by the external thread's aqueezing the surface of the internal thread so as to affect leakproofness
3. When connecting the pipe thread type ball valve with pipe thread, the internal thread can be either tapered pipe thread or cylindrical pipe thread, but the external thread must be tapered pipe thread, otherwise it will cause leakage due to loose connection. 
4. When installing the pipe thread type ball valve, the sealing material must be clean. 
5. Such obstacles as wall, coupling nut and pipe should not be placed in the open/close range. 
6. When the ball valve handle is parallel to the body, it is open, otherwise, it is close. 
7. The working medium should not contain particles, corrosive gas or liquid 
8. PP-R ball valve installation instruction: 
1. Remove the coupling nut, PP-R pipe and O-ring from the valve body
2. Pull the coupling nut on the pipe in the original direction 
3. Join the PPR flange with PPR pipe with a hot fusion machine. Pull the Oring in the PPR flange when it cooled down. Last, tighten the coupling nut with valve body. 

About our company:  
NINGBO HI-TECH SMART MACHINERY CO LTD was established in 2013, is a high tech company specialized in pneumatic components and microduct accessories manufacturing. After years' hard working, it has owned 2 factories now, and the products include pneumatic vibrators, air cylinders, solenoid valves, air treatment units, pneumatic fittings&mufflers, microduct connectors and other accessories. We have sold our goods to more than 60 countries, and that number is still increasing.
 Our Services & Strength
1. We have more than 10 years experience on pneumatic products;
2. Excellent quality control has always been the goal of our practice;
3. You can purchase most of the pneumatic products here;
4. Sample orders and orders with a small number of products are acceptable;
5. OEM, ODM is ok for us. Not only the label and packaging, but also the personalized customization of the product itself;
6. Any requirements, just feel free to let us know.