10mm Plastic Gas Block Air Gasblock Microduct Connector

• Customization: Available
• Certification: REACH, DVE, CCC, RoHS, ISO, CE
• Color: Blue
• Model NO.: Gas Block Connector
• Shape: Square
• Material: Plastic
• Type: Cable Bridge
• Standards: Ec
• Materials: PC
• Sizes: 3- 22mm
• Used: Fiber Industry
• Transport Package: PP Bag
• Specification: CE, ROHOS
• Trademark: SMT
• Origin: China
• Production Capacity: 100000000
• Package Size: 20.00cm * 20.00cm * 20.00cm
• Package Gross Weight: 0.500kg

Product Description

• 

  

  
• 10mm Plastic Gas Block air gasblock Microduct Connector
•  
  

  

  
  Microduct Gas Block Connectors with transparent body for visual control when blowing microcable. Connectors can be reused for more than 10 times while still maintaining the same high performance characteristics - operational at 15bar (218 psi) and with quick burst rating of 25bar (363 psi). All connectors have two removable locking clips to prevent tube release. 
  
  Features:
  Gas/Water Block Connectors normally used between indoor and outdoor environments to prevent air flow that may result in condensed water getting into in ducts. After cable installation, the connector can be gas sealed by pushing the connector ends together.
  • Easy installation, without any special tools.
  • Transparent plastic body, easy to observe the situation.
  • High temperature resistance -40ºC~65ºC
  • Avoid fluid(gas) entering the microducts and demage the equipments.
• Provides a watertight and gastight seal
• The internal seal can be open to blow cable through and closed after installation to provide a complete seal
• Tube to tube connection
• Caters for various cable diameters

About MicroDuct Accessories

Microduct Couplers and End Stops are of a quick connect design, with pull ring release and a clear barrel for viewing. The clear barrel allows for visual inspection to determine if the duct ends are properly seated in the coupler during installation, or if the cable has passed through the coupler during the installation phase.

Microduct Couplers are available two configurations; straight and transition to allow the connection of two microducts with different outer diameters. Microcouplers are rated at 175 psi with a safety factor of 4:1. Sizes and specification are listed below:
 

Product	Code	PCS/CTN
GBC-5/3.5	5mm Gas Block, 0.5-3.5mm Cable	1800
GBC-7/5.5	7mm Gas Block, 2-4.7mm Cable	1200
GBC-7-5/3.5	7-5mm Reducer Gas block	1200
GBC-8.5/6	8.5mm Gas Block, 3-6mm Cable	960
GBC-8/4	8mm Gas Block, 1-6mm Cable	1200
GBC-10/6	10mm Gas Block, 3-6mm Cable	960
GBC-10/8	10mm Gas Block, 5-8mm Cable	960
GBC-12.7/10	12.7mm Gas Block, 5-8mm Cable	360
GBC-12/10	12mm Gas Block, 7-10mm Cable	480
GBC-12/6	12mm Gas Block, 3-6mm Cable	480
GBC-12/8	12mm Gas Block, 5-8mm Cable	480
GBC-14/10	14mm Gas Block, 7-10mm Cable	360
GBC-14/12	14mm Gas Block, 9-12mm Cable	360
GBC-14/6	14mm Gas Block, 3-6mm Cable	360
GBC-14/8	14mm Gas Block, 5-8mm Cable	360
GBC-16/6	16mm Gas Block, 3-6mm Cable	240
GBC-16/8	16mm Gas Block, 5-8mm Cable	240
GBC-16/10	16mm Gas Block, 7-10mm Cable	240
GBC-16/12	16mm Gas Block, 9-12mm Cable	240
GBC-18/6	18mm Gas Block, 3-6mm Cable	240
GBC-18/8	18mm Gas Block, 5-8mm Cable	240
GBC-18/10	18mm Gas Block, 7-10mm Cable	240
GBC-18/12	18mm Gas Block, 9-12mm Cable	240

Microduct Split Couplers are used when it is necessary to access cables at mid-span for placing slack coils. Available to fit 12mm and 12.7mm O.D. microducts.

Microduct Cutters are available in two styles:
Standard Straight Cutters for clean cuts prior to coupling
Ring Cutters are used when necessary to safely access cable in the duct

Microduct End Caps are threaded into microducts internally for pressurizing microducts prior to installing. Microduct End Caps keep microducts from imploding and add stiffness during the installation process. Available to fit 10mm and 12 and 12.7mm microducts.

Microduct Coupler Removal Tool makes removing microcouplers easy saving wear and tear on hands and fingers.

Digital Calipers used for measuring the outer diameters of cables and ducts to insure proper sizing and compatibility with Jetting inserts and couplers. Measurements ASME and Metric.