Aluminum Red Pneumatic Gear Vibrator

Product Description

Gear Type Pneumatic Vibrator Oscillator

1: Lubrication free;
2: Only needs clean air;
3: Highest temperature: 120°C 250°F;
4: Work with low noise (60-75 dBA);
5: Small size, easy to install and maintain;
6: Ball Material: polished stainless steel    Body Material: aluminum;

Specifications

1) high quality and competitive price 
2) standard sizes 
3) very popular used in supermarket 
4) 7 or 10 days delivery time

Specification:
Temperature : 200degree
Noise grade : 75"100dBA
Work frequency : 8000 to 38000 RPM
Vibrator power : 1700 to 12000 N
 
 
Feature:
1. New fashion blanking device ,no need power ,but only the clean air;
It make good blanking effect with big magnetic force ;
Low running cost and well energy saving
2. . Simple configuration but reliable,it is convenient for installing and upload .
Steady running and low failure rate
3.  Low frequency/ continuous impact model, sudden activation/ deactivation is allowed
4.  Frequency and amplitude of impact can be adjusted as required
5.  Direct impact onto target object to produce the optimum vibration 
feedback
6.  Highly strengthened aluminum body

Description:
A high speed range and eccentric working moments are combined in these Vibrators to produce a powerful vibration. The body is made from an extruded stove enameled aluminum section and the hard coated
End plates enable the vibrator to be used in the food and pharmaceutical industries. The GT-turbine vibrators comply to current international noise regulations under factory test conditions.

Design:
The vibration is produced by the centrifugal force of the positive and negative unbalance moments in the rotor, the rotor is supported on two heavy duty, matched shielded ball bearings, A special
Long life grease ensures a long working life. The inner and outer raceways of the bearings are designed so that the bearings can be easily replace using only a pin-wrench. The end plates are fitted with right-and left-hand threads and self-locking.