| Customization: | Available |
|---|---|
| Media: | Cleam Air |
| Temperature: | Ordinary Temperature |
|
Still deciding? Get samples of US$ 1000/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Presently, the long-arm rotating baghouse is polularly used in power industry, the feature of which is suitable for the dust wind with high air volume, small wokload of maintenance, high blow volume, low pressure and energy saving, etc. The heart part system of pulse valve is usually imported from abroad the 8" Pulse Valve while the most of Pulse Valve produced domestically is at most 3" which can not meet the requirement of high blow jetting volume. To satisfy the high speed development of APC requirement, we have developed 8", 10", 12", 14" and 16" low pressure pulse valve. After the experimental test, all the performance have reached the foreign standard. Welcome the users to select.
Working Principle
The low pressure large-orifice pulse valve stop working by the differential pressure between the both sides of diaphragm. The pilot head of Pulse Valve open the balancing holes with time of pulse duration ( 0.15-0.3s). The airflow in the high pressure area of diaphragm will be released so that the diaphragm will be holded up and the Pulse Valve start cleaning.
Installation Size for reference
Assembly of Pulse Valve
Contrast Test Overview
t1 Pulse duration of electrial controller
t2 Diaphragm opening lag time after getting signal
t3 Diaphragm opening time
t4 Cleaning tim of pulse valve
t5 Diaphragm closing lag time after getting signal
t6 Closing time of signal after diaphrgm opening and closing
Experimental Examples
Technical Parameters
>Pulse Valve Working pressure:0.05~0.1Mpa
>Pulse Valve Working medium:clean air
>Pulse Valve Voltage:DC24V(AC220V/50Hz)
>Pulse Valve Current:0.8A(0.05A)
>Used environment:
Temperature:-40°C~130°C
The relative humidity of air is no more than 85%
Features of SMART pulse valve
>The three levels diaphragm structure ensures the exhausting matching gas balancing, which make the Pulse Valve work more sensitively.
>Improving the Pulse Valve blowing volume and functional strength while reducing the Pulse Valve working pressure, then the Pulse Valve will work stably and relaibly, cost saved.
>Supply air pressure is less than 0.1Mpa and compressed air is to be used, no need for gas pipe network.
>Lower pressure of supply gas and Roots Blower can be used, which makes the equipment cheap cost and easy management, easy to use.
>This valve is manufactured along with the air manifold and it takes once to install, easy for installation and maintenance.
Installation Instructions
1,The dimension of air manifold must meet the specification requirement. All the matching surface should be cleaned before installation.
2,The air manifold installation surface should be clean and smooth, no burrs, welding slags or other materials which will shorten the life of diaphragm.
3,When installing the diaphragm ( before Pulse Valve body installation), the postion of diaphragm hole must be consistent with the flange hole.
4,The convex side of diaphragm assembly must match the surface of exhaust pipe in air manifold.
5,When installing the Pulse Valve, the spring which must fix into the plate trough.
6,After installation of Pulse Valve body, the silencers must be fixed on the air manifol to ensure Pulse Valve clean and dry, in order to prolong the Pulse Valve life and reduce noise pollution.
SMART PNEUMATICS' Sprit is to give you the best quality, the competitive price, the quick delivery, the perfect service. Our goal to customers is "Always Smart Solution for your Automatic System. "
){kind=link}